Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HVAC DUCT WORK & VENTILATION > PVC GAS VENT PIPE & ACCESSORIE
Sort By:
Page of 1
COUPLING PP 2IN PVC SYSTEM 636 SCRN VNT 2IN PVC SYS 636      ELBOW 45DEG 2IN F PVC SYS 636
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices. Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris and animals out of the venting system. An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.
ELL 90DEG 2IN LNG F PVC SYS636 COUPLING PP 3IN PVC SYSTEM 636 TEE 2X2X2IN F PVC SYSTEM 636
An elbow is installed when a change of direction is needed in a vent line. The 90 deg elbow is a long-radius elbow to reduce the restriction on airflow in the exhaust or intake line. System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices. IPEX System 636 Pipe Tee, Nominal Size: 2 in, Hub Connection, Operating Temperature: 65 deg C, PVC
SCRN VNT 3IN PVC SYS 636      ELBOW 45DEG 3IN F PVC SYS 636 COUPLING PP 3X2IN PVC SYS 636
Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris and animals out of the venting system. An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed. System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
TEE 3X3X1-1/2IN F PVC         KT DRN COND PVC 2-1-1/2IN     ELL 90DEG 3IN LNG F PVC SYS636
IPEX System 636 Pipe Tee, Nominal Size: 3 x 1-1/2 in, Hub Connection, Operating Temperature: 65 deg C, Schedule Rating: SCH 40, PVC The condensate drain kit is designed to be used with a tee in the exhaust vent line to drain condensate through 1/2 in solid PVC pipe or flexible tubing. An elbow is installed when a change of direction is needed in a vent line. The 90 deg elbow is a long radius elbow to reduce the restriction on airflow in the exhaust or intake line.
CEMENT PVC 473ML SYSTEM 636   VNT GAS 2INX10FT PVC SYS 636  VNT GAS 3INX10FT PVC SYS 636
IPEX Cement, Net Content: 473 mL, Liquid, Gray, Odor/Scent: Ketone, Compositions: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone, VOC Content: <510 g/L, Flash Point: -4 deg F, Boiling Point: 151 deg F, Flammability Rating: 3, Density: >2, Specific Gravity: 0.9611, Applicable Materials: PVC IPEX System 636 Flue Gas Vent Pipe, 2 in Dia Outside, PVC, Temperature Rating: 149 deg F, 10 ft L IPEX System 636 Flue Gas Vent Pipe, 3 in Dia Outside, PVC, Temperature Rating: 149 deg F, 10 ft L
PRIMER PVC&CPVC 473ML SYS 636
System 636 PVC/CPVC primer is certified as a system component for use with all diameters of System 636 PVC/CPVC pipe and fittings. System 636 PVC/CPVC primer is required on PVC and CPVC surfaces only for installation temperatures at or below 0 deg C (32 deg F).