|
|
|
|
|
|
|
|
|
|
|
Tuf-E-Nuf Fine Finishing Blade, 7-1/4 in Diameter, Carbide Cutting Edge, ATB Teeth, 40 Teeth, 5/8 in Arbor, 20 deg Hook Angle, 0.087 in Kerf, Applicable Materials: Plywood, Wood
|
Task Supercut Finishing Saw Blade, 7-1/4 in Dia, Cutting Edge Material: Tungsten Carbide, Teeth Type: ATB, Number of Teeth: 40, Arbor Size: 5/8 in, 6000 rpm, Hook Angle: 18 deg, Kerf: 0.126 in, Applicable Materials: Plywood
|
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWALT?? small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum up.
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Hardbody Finishing Saw Blade, 7-1/4 in Dia, Cutting Edge Material: Carbide, Teeth Type: ATB, Number of Teeth: 40, Arbor Size: 5/8 in, 6000 rpm, Steel, Applicable Materials: Particle Board, Plywood, Wood
|
Milwaukee's wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tearout in the cut material. An anti-friction coating keeps the blade cool while cutting and resists corrosion and gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
|
Diablo ultra finish blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Circular Saw Blade, 10 in Dia, Cutting Edge Material: Tungsten Carbide, Number of Teeth: 60, Arbor Size: 5/8 in, 6000 rpm, Kerf: 0.11 in
|
Made of carbide steel. 40T.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For corded circular saws. 5/8 ft in universal diamond arbor. 0.071 in thin kerf for faster, cleaner cuts. Heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Precision honed C3 tungsten carbide tips hold edge longer. Round shape means each tooth cuts uniform equal amounts of wood. Blade flatness ensures close tolerances. Alternate top bevel grind, 20 deg hook angle. Fully hardened plate runs truer longer. Reinforced shoulder for added durability.
|
Thin kerf, 0.083 in, saw blades for miter saws and table saws. Precision tensioned and balanced blade for an accurate cut; #400 grit diamond ground teeth for a smooth finish. Alternate top bevel, 15 deg hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultra-thin kerf, 0.063 in, for more cuts per charge. Face ground carbide teeth for fast, clean cuts. Aggressive hook angle for fast cuts. Construction carbide teeth for longer life.
|
|
Thin kerf saw blade for circular saws. Alternate top bevel, 2.7 mm kerf, 13 deg hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin kerf, 0.071 in, saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 deg hook angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of titanium carbide steel. 60T.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fine finish blades let trim crews get the most out of sliding or chop style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Diablo particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.
|
|
|
|
|
|
|
|
|
|
|
|
|
Diablo new ultimate polished finish saw blades feature axial shear face grind (ASFG) that cleanly shears through materials for excellent quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring double-side grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo proprietary TiCo high-density carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo ultimate polished finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo new ultimate polished finish saw blades are redefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.
|
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.8 mm plate, 0.095 in kerf, 15 deg hook angle.
|
|
|