|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT?? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT?? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT?? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT?? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
Blue groove point and cutting edge for faster chip removal, single pointed spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Blue groove point and cutting edge for faster chip removal, single pointed spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 3/8 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 1/2 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 9/16 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 5/8 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 3/4 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 13/16 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee?? 7/8 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee? 1 in x 6 in flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and formica. This bit offers a 6 in drilling depth but can be used with a 12 in extension (48-28-3350) for extended deep-hole drilling. 3/16 in shank Dia.
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Daredevil? Spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal, hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featuring a heavy-duty, full-length, heat-treated shank for protection against bends and breaks, DeWALT? spade bits are equipped with high-performance cutting spurs for optimum hole finish. An extreme speed channel provides fast chip removal and a 1/4 in ball groove shank offer quick-change applications. A 1/4 in hex shank helps to prevent slippage and a hang hole enables easy storage and wire pulling.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
|
|
