Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL)
Choose a sub category:
PUMP TANKS WELL & JET PUMP ACCESSORIES PITCHER PUMPS / ACCESSORIES
PRESSURE SWITCHES PRESSURE GAUGES PRESSURE REGULATING VALVES
WELL PUMP REPAIR PARTS CHECK VALVES - IP THREADED CHECK VALVES - PUSH FIT
CHECK VALVES - PVC IP THREADED CHECK VALVES - PVC SOLVENT FOOT VALVES
Sort By:
Page of 5
KIT HEAT SHRINK TUBE 2IN KIT HEAT SHRINK TUBE 10 12&14 KIT HEAT SHRINK TUBE 3IN
HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered. HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered. HS series heavy-wall adhesive lined, flexible cross-linked polyolefin heat shrinkable tubing. Designed for the new smaller OD lead wires being used on submersible pump motors. This tubing is suitable for applications up to 600 V providing excellent waterproof insulating and environmental sealing protection for splices, connections and jacket repairs. High-impact and abrasion resistance of this heavy-wall tubing provides the highest level of mechanical durability. When heated above 250 deg F there is a 3:1 shrink ratio. Tubing will shrink unrestricted to 33% of its original diameter, the recovered wall thickness of the tubing is proportional to the degree of recovery, approx. 0.08 in when fully recovered.
VALVE LEATHER 3-1/2IN OD CYL GA PRESS 2IN DRY 0-200PSI Mueller ProLine In-Line Check Valve
Boshart Pump Seal, Shaft Size: 3-1/2 in, Leather Boshart PG-200 Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Measuring Range: 0 to 200 psi, Accuracy: 2 to 3 %, Dial Size: 2 in, Operating Temperature: -40 to 140 deg F Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
GA PRESS 2IN DRY 0-30PSI GA PRESS 2IN DRY 0-100PSI VALVE 1/2 PVC SPRING LOAD THRD
Boshart Pressure Gauge, 1/4 in Connection, Measuring Range: 0 to 30 psi Boshart Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Measuring Range: 0 to 100 psi, Accuracy: 2 to 3 %, Dial Size: 2 in, Operating Temperature: -40 to 140 deg F Boshart In-Line Check Valve, Nominal Size: 1/2 in, Threaded Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: EPDM, 100 psi
VALVE 1/2 PVC SPRING LOAD SKT VLV TNK/SNFR 1/8IN MPT VLV TNK/SNFR 1/4IN MPT
Boshart In-Line Check Valve, Nominal Size: 1/2 in, Socket Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: EPDM, 100 psi Boshart Air Snifter Valve, 1/8 in Connection, MPT Connection, 150 psi, Temperature Rating: -10 to 165 deg F, Brass Boshart Air Snifter Valve, 1/4 in Connection, MPT Connection, 200 psi, Temperature Rating: -40 to 225 deg F, Brass
GA PRESS 2IN DRY 0-100PSI GA PRESS 2IN DRY 0-100PSI VLV CHK PVC 3/4IN 200PSI
Boshart Pressure Gauge, Measuring Range: 0 to 100 psi, Dial Size: 2 in Boshart Pressure Gauge, 1/8 in Connection, CBM Connection, Measuring Range: 0 to 100 psi, Dial Size: 2 in Boshart In-Line Check Valve, Nominal Size: 3/4 in, Threaded Connection, Trim Material: Stainless Steel, Body Material: PVC, Softgoods Material: EPDM, 100 psi
DRIVE COUPLING 1-1/4IN CUP LTHR SFT 3IN 2IN L HL VALVE FOOT 3/4IN PVC W/SCRN LF
Boshart Drive Coupling, Nominal Size: 1-1/4 in, Stainless Steel, Galvanized Boshart Pump Seal, Shaft Size: 2 in ID x 3 in OD, Leather Boshart Foot Valve, 3/4 in Connection, 150 psi, Seal Type: Gasket, Body Material: PVC, Spring Material: Stainless Steel, Softgoods Material: Acetal/Polypropylene/Rubber
CUP LTHR 1-3/8IN 5/8IN SM HL GA PRESS 2IN LIQ 0-100PSI FOOT VALVE 1IN
Boshart Pump Seal, Shaft Size: 5/8 in ID x 1-3/8 in OD, Leather Boshart Pressure Gauge, Gauge Case Material: Steel, Gauge Case Color: Black, 1/4 in Connection, MPT Connection, Connection Location: Back, Measuring Range: 0 to 100 psi, Accuracy: +/-1.5 %, Dial Size: 2 in, Lens Material: Polycarbonate, Liquid Filled: Glycerin, Operating Temperature: -40 to 140 deg F Boshart Foot Valve, 1 in Connection, 150 psi, Body Material: PVC, 9 in OAL, Temperature Rating: 68 deg F
DRIVE CAPS 1-1/4IN CHECK VALVE PVC 1-1/4SOLV VENTURI ADPT 1-1/4X10IN NOLEAD
CHECK VALVE PVC 1-1/4SOLV
Our Price: $16.99
Boshart Drive Cap, Nominal Size: 1-1/4 in, Stainless Steel, Black Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Boshart Venturi Adapter, Nominal Size: 1-1/4 in, Galvanized, 10 in L
VALVE FT 1-1/4IN PVC W/SCRN LF KIT REPAIR HAND PUMP 3IN Mueller ProLine In-Line Check Valve
Boshart Foot Valve, 1-1/4 in Connection, 150 psi, Seal Type: Gasket, Body Material: PVC, Spring Material: Stainless Steel, Softgoods Material: Acetal/Polypropylene/Rubber Boshart Hand Pump Repair Kit, Suitable for: 3 in Dia Cylinder Pump, Includes: 3 in OD Cup Leather, 3-1/2 in OD Valve Leather Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
VLV RLF 1/2IN NO LD BRZ VLV RLF 3/4IN NO LD BRZ ADAPT HVYD 1X3/4IN FPT X PEX
Boshart Pressure Relief Valve, Nominal Size: 1/2 in, Operating Pressure: 75 psi, Body Material: Brass, Spring Material: Stainless Steel, Softgoods Material: Buna-N, Dimensions: 4 in L x 2 in W x 3-1/2 in H Boshart Pressure Relief Valve, Nominal Size: 3/4 in, Operating Pressure: 75 psi, Body Material: Brass, Spring Material: Stainless Steel, Softgoods Material: Buna-N, Dimensions: 4 in L x 2 in W x 3-1/2 in H Boshart Pipe Adapter, Nominal Size: 1 x 3/4 in, FPT x PEX Connection, Brass