Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES PLUMBERS PUTTY PLUMBING EPOXYS
Sort By:
Page of 2
ProSource PMB-445 Pipe Seal Tape 1/2X260 WHITE PTFE TAPE 1/2X520 WHITE PTFE TAPE
The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow. Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping. Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping.
COMP PP JNT SEALR 40G 3/4X260 WHITE PTFE TAPE PIPE THREAD TPE PINK 1/2X260IN
Moen M-Line Pipe Joint Compound, Net Content: 2 oz Oatey? PTFE white general-purpose thread seal tape provides a clean, positive seal on threaded connections. White thread seal tape is an all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, galvanized steel or black iron piping. Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton.
COMPOUND PIPE JOINT GREY 1OZ GAS LINE TPE PTFE YELLOW 1/2IN CEMENT ABS YELLOW 118ML
Oatey? pipe joint compound is a firm, smooth sealing compound formulated for most metal threads to create tight joints on lines carrying water, steam or air. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Oatey Pipe Cement, Net Content: 118 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS
CLEANER ALL PIPE CLEAR 118ML COMPOUND PIPE JOINT GRY 237ML COMPOUND PIPE JOINT W/PTF 29ML
Oatey Primer Cleaner, Net Content: 118 mL, Liquid, Clear/Purple, Odor/Scent: Solvent-Like, Compositions: Acetone, Cyclohexanone, Viscosity: <10 cPs, VOC Content: <25 g/L, Flash Point: -4 deg F, Boiling Point: 133 deg F, Density: 0.79, Application Method: Brush, Roller Oatey? Great White? pipe joint compound with PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints. Oatey? Great White? pipe joint compound with PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints.
PUTTY PLUMBER SS 14OZ CEMENT SOLVENT ABS 118ML CEMENT WET/DRY GREY 118ML
Oatey? plumber's putty is a stainless, long-lasting, easy-to-use fixture setting compound for frames, faucets and basket strainers. It provides a waterproof seal between two rigid surfaces that remains flexible and will not harden, shrink, crack or crumble. Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235. Medium-bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564.
PRIMER CRC CLEAR 118ML PTY PLUMBERS 54IN WHT RL CEMENT PVC CLEAR 118ML
Oatey Primer, Net Content: 118 mL, Liquid, Clear, Odor/Scent: Ether-Like, Compositions: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone, VOC Content: 550 g/L, Flash Point: -10 to -5 deg C, Boiling Point: 151 deg F, Flammability Rating: 3, Density: 2.5, Specific Gravity: 0.84 Moen Plumbers Putty Oatey Pipe Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro Furan, Acetone, Methyl Ethyl Ketone, Chloro Homopolymer Ethene, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC
CEMENT 1-STEP GREY 118ML CEMENT PVC GREY 118ML TRANSITION CEMENT 118ML
For all non-pressure PVC DWV piping system up to 6" diameter.  One-step - no primer required.  Reduces time and money.  CSA approved.  Reduced installation time. Oatey Cement, Net Content: 118 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr Oatey Transition Cement, Net Content: 118 mL, Liquid, Odor/Scent: Solvent, White, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Amorphous Fumed Silica, Specific Gravity: 2.5, Boiling Point: 151 deg F, Flash Point: 14 to 23 deg F, VOC Content: <510 g/L, Viscosity: 1000 to 2100 cPs, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS, PVC
CLEANER ALL PIPE CLEAR 236ML CEMENT ABS YELLOW 236ML CEMENT ALL-PRPS MLKY-CLR 118ML
Low-VOC, flows freely and evaporates quickly, fast-acting cleaner removes surface dirt, grease and grime. All schedules and all diameters. Child-resistant cap. Oatey Solvent Cement, Standard Oatey Pipe Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Chloro-homopolymer Chlorinated Ethene, Amorphous Fumed Silica,, VOC Content: <325 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: ABS, CPVC, PVC
EPOXY PUTTY MULTI-PURP 4OZ CEMENT PVC GREY 236ML CEMENT CPVC CLEAR 118ML
For sealing, patching and mending compounds. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Ideal for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Oatey Cement, Net Content: 236 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr Oatey Solvent Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Chloro- Homopolymer Chlorinated Ethene, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Viscosity: 500 to 1500 cPs, VOC Content: <490 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5
CEMENT ALL-PRPS MLKY-CLR 236ML CEMENT SOLVENT ABS 236ML CEMENT WET/DRY GREY 236ML
Medium-bodied, milky-clear cement for use on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in Dia with interference fit. Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235. Medium-bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564.