Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS FLARE FITTINGS > BRASS FLARE - NUTS
Sort By:
Page of 1
NUT MILLED 1/4X3/4IN BRS MILLED NUT SHORT 5/16 FFL NUT MILLED 3/8X1IN BRS
Fairview Milled Short Nut, Flared Angle: 45 deg, 1400 psi Pressure, -65 to 250 deg F, 0.03 in Wall Thickness, Brass, 1/4 in Diameter, 3/4 in Length, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tubes Fairview Milled Short Nut, Flared Angle: 45 deg, 1200 psi Pressure, -65 to 250 deg F, 0.032 in Wall Thickness, Brass, 5/16 in Diameter, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tube Fairview Milled Short Nut, Flared Angle: 45 deg, 1000 psi Pressure, -65 to 250 deg F, 0.032 in Wall Thickness, Brass, 3/8 in Diameter, 7/8 in Length, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tubes
NUT FORGED 5/8 SHORT TYPE NUT FLRE SHRT 1/2X15/16IN BRS NUT FLRE SHRT 3/8X13/16IN BRS
Fairview Short Nut, Flared Angle: 45 deg, 650 psi, Temperature Rating: -65 to 250 deg F, Wall Thickness: 0.035 in, Brass, 5/8 in Dia, 1-1/8 in L, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tube Fairview Nut, Flared Angle: 45 deg, 750 psi Pressure, -65 to 250 deg F, 0.032 in Wall Thickness, Brass, 1/2 in Diameter, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tubes Fairview Nut, Flared Angle: 45 deg, 1000 psi Pressure, -65 to 250 deg F, 0.032 in Wall Thickness, Brass, 3/8 in Diameter, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tubes
NUT MILLED 1/2X7/8IN BRS NUT FLRE LNG 1/2X1-5/8IN BRS
Fairview Milled Short Nut, Flared Angle: 45 deg, 750 psi Pressure, -65 to 250 deg F, 0.032 in Wall Thickness, Brass, 1/2 in Diameter, 1 in Length, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tubes Fairview Milled Long Nut, Nominal Size: 1/2 in, Brass, 1-5/8 in L, 750 psi, Operating Temperature: -65 to 250 deg F, Suitable for: Aluminum, Copper, Welded Steel Hydraulic Tube