|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Cupped Nail Set, 2/32 in Tip, Shank Type: Hex
|
Task Cupped Nail Set, 3/32 in Tip, Shank Type: Hex
|
Task Cupped Nail Set, 4/32 in Tip, Shank Type: Hex
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
|
Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 12 in (30.5 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Mini Pry Bar, Stainless Steel, 7 in L
|
Richard Lever Bar Scraper, Tip Type: Chisel, HCS, 10 in L
|
Task Scratch Awl, Shank Material: Chrome Molybdenum Steel, Soft-Grip Handle, Rubber Handle, 100 mm OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuf-E-Nuf Flat Pry Bar, Steel, 15 in L, 2 in W
|
Task Nail Puller, Carbon Steel, 11-1/2 in L
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
Task Mini Pry Bar, Stainless Steel, 10 in L
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 18 in (45.7 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
The Vulcan utility bar is made from dropped forged steel (hardness for blade HRC 38-42) 6 mm thick. It has a matte black finish and nail slots at both ends offer easy accessibility and leverage.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
