Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > PVC CONDUIT FITTINGS
Sort By:
Page of 2
TERMINAL ADAPTR 1/2IN GREY PVC ADAPTER CNDT 1/2IN F PVC GREY ADAPTER CNDT 3/4IN F PVC GREY
A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc. IPEX Conduit Adapter, Trade Size: 1/2 in, Female Connection, PVC, Gray, 1.4 in L A female adapter is used to transition from solvent weld to a threaded connection e.g. via a male threaded fitting.
PVC COUPLING 1 IN SCH 40 PVC COUPLING 1/2 IN SCH 40 TERMINAL ADAPTR 3/4IN GREY PVC
Couplings are used to join two pieces of conduit using a solvent weld connection. Couplings are used to join two pieces of conduit using a solvent weld connection. A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc.
PVC COUPLING 3/4 IN SCH 40 TERMINAL ADAPTR 1IN GREY PVC PVC ELBOW 90 BELL END 1/2 IN
IPEX Conduit Coupling, Trade Size: 3/4 in, Socket Connection, PVC IPEX Terminal Adapter, Trade Size: 1 in, Male Connection, PVC, Gray, 1.8 in L Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling.
PVC BUSHING REDUCING 3/4 X 1/2 20654 1/2IN PVC BELL END ELBOW ADAPT CNDT FEMALE 1IN PVC GREY
Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal. IPEX Elbow, Trade Size: 1/2 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 4 in, Dimensions: 4.8 in L x 1.7 in W x 0.9 in H, Spigot x Bell End Connection, Gray IPEX Conduit Adapter, Trade Size: 1 in, Female Connection, PVC, Gray, 2 in L
PVC ELBOW 90 BELL END 3/4 IN PVC COUPLING 1-1/4 IN SCH 40 BUSHING REDUCER 1X1/2IN PVC
Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling. Couplings are used to join two pieces of conduit using a solvent weld connection. Reducer bushings are used to reduce the size of the hub end of a fitting to accept a smaller size conduit or spigot end of a fitting.
20655 3/4IN PVC BELL END ELBOW ADAPTER CNDT 1-1/4IN F PVC GRY TERMINAL ADPTR 1-1/4IN GRY PVC
IPEX Elbow, Trade Size: 3/4 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 4-1/2 in, Dimensions: 4.8 in L x 2.2 in W x 1.3 in H, Spigot x Bell End Connection, Gray IPEX Conduit Adapter, Trade Size: 1-1/4 in, Female Connection, PVC, Gray, 2.1 in L IPEX Terminal Adapter, Trade Size: 1-1/4 in, Male Connection, PVC, Gray, 1.9 in L
ADAPTER CNDT 1-1/2IN F PVC GRY PVC COUPLING 1-1/2 IN SCH 40 ADAPT CNDT FEMALE 2IN PVC GREY
IPEX Conduit Adapter, Trade Size: 1-1/2 in, Female Connection, PVC, Gray, 2.3 in L Kraloy PVC couplings can be used with SCH 40 and SCH 80 rigid PVC conduit/duct to create a solvent weld connection. Engineered to be concrete and weather-tight, Kraloy couplings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, non-metallic PVC fittings are durable and will not rust or corrode. IPEX Conduit Adapter, Trade Size: 2 in, Female Connection, PVC, Gray, 2.9 in L
PVC ELBOW 90 DEG BELL END 1 IN PVC BUSHING REDUCING 3/4 X 1/2 TERMINAL ADAPTR 2IN GREY PVC
Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling. A threaded reducer bushing is used to convert a solvent weld fitting hub to a smaller sized female threaded connection. IPEX Terminal Adapter, Trade Size: 2 in, Male Connection, PVC, Gray, 2.8 in L
ADAPTER TERMINAL CONDUIT 1.5IN PVC COUPLING WHT SCHED 40 20035 1-1/4IN X 1IN PVC REDUCE
A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc. Kraloy PVC couplings can be used with SCH 40 and SCH 80 rigid PVC conduit/duct to create a solvent weld connection. Engineered to be concrete and weather-tight, Kraloy couplings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, non-metallic PVC fittings are durable and will not rust or corrode. Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal.
PVC BUSHING REDUCING 1 X 3/4 20656 1IN PVC BELL END ELBOW - PVC ELBOW 90 BELL END 1-1/4 IN
Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal. IPEX Elbow, Trade Size: 1 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 5-3/4 in, Dimensions: 7.5 in L x 2.8 in W x 1.5 in H, Spigot x Bell End Connection, Gray Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling.