|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid structure that allows ease of installation without warping or moving. Male or female channel design, that will slide easily through the housing to ensure smooth installation. Maximum extension up to 25 in, accommodates excess distance between joists. Housing can be positioned at any point within 25 in joist span. Break-off score lines feature, allows tool-less shortening for 12 in joist span. Pre-installed nail prevents the nail from going on an angle and causing the hanger bars to shift. Nail slots for adjustable height, allows slight vertical adjustment after half-nailing on wood joists. Bottom of joist tab guide located below the nail for perfect alignment on the joist. Drop down feature allows for easy access to the wiring compartment during installation. Double headed 1-3/4 in nail to allow easy removal of housing. Integrated groove allows fixture to snap on T-bars in suspended ceiling applications.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Coilex tapered plastic baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Liteline UCP Recessed Combination Kit, Specifications: 120 V Voltage, 4 in Housing Dia, Remodel Housing Type, MR16 Halogen Lamp, Medium (E26) Base, 50 W Lamp Wattage, 1 Lamp, White, Includes: Bulb, Housing and Trim
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
Liteline Recessed Combination Kit, Specifications: 120 V Voltage, 4 in Housing Dia, Remodel Housing Type, PAR16 Halogen Lamp, Medium (E26) Base, 50 W Lamp Wattage, 1 Lamp, 2000 hr Average Life, 2800 K Color Temperature, Brushed Nickel, Includes: RF402 Housing, GR-BN-TH18R Trim and LMP16E26AC-50-BX Halogen Lamp
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-insulated with pheonlic stepped baffle trim. Uses one 65 W BR30 or 75 W PAR30L bulb, (not included). For use in insulated ceilings. Includes housing and directional trim. 9 in W x 5-1/4 in H.
|
Non-insulated with pheonlic stepped baffle trim. Uses 1 x 65 W BR30 or 1 x 75 W PAR30L bulb, (not included). For use in insulated ceilings. Includes housing and directional trim. 9 in W x 5-1/4 in H.
|
Liteline Recessed Combination Kit, Specifications: 50 W Wattage, PAR20 Halogen Lamp, Medium E26 Base, 1 Lamps, 40,000 hr Average Life, 2800 K Color Temperature, White, Dimensions: 4 in Dia, Includes: RF401A New Construction Housing, HV4-TH4001-WH Stepped Baffle Recessed Trim, PAR20-50W130VE26FL Lamp
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Color Preference? retrofit downlights offer 3 CCT options, 3000K, 4000K or 5000K. Selectable before or after installation. Reduces inventory hassle and investment at the same time meeting the users exact lighting requirements.
|
Liteline Recessed Combination Kit, Specifications: 120 V Voltage, 4 in Housing Dia, Insulated Ceiling Housing Type, MR16 Halogen Lamp, Medium (E26) Base, 50 W Lamp Wattage, 1 Lamp, White, Includes: RF405 Housing, GR-TH01-WH Trim and LMP16E26AC-50-BX Halogen Lamp
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5ICAT is designed for use in insulated ceiling applications. This is an Air-Tite? housing and may be used to meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium base socket adaptor included. Integrated white trim. 11,000 hrs average life, 120 V.
|
Our Color Preference? retrofit downlights offer 3 CCT options, 3000K, 4000K or 5000K. Selectable before or after installation. Reduces inventory hassle and investment at the same time meeting the users exact lighting requirements.
|
The ETi 30-in-1 color preference retrofit downlights offer the flexibility and performance to meet the requirements of any job. With 5 CCT selectable, 3 Lumen brightness settings, plus 2 trim/baffle color 30 different configurations. The 30-in-1 downlight reduces inventory investment since 1 SKU can replace multiple SKUS as well as offering the customer the ability to fine tune color and brightness for each installation location.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
The spring loaded clips clamp the fixture to the finished ceiling. Perfect for residential and commercial lighting applications.
|
ETI SSL's 4 in canless recessed can downlight with integral J-box is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture has no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Equipped with our Color Preference? Technology to choose between five color temperatures of light at install. The 4 in canless recessed can downlight emits 814 Lumens of light while using only 11.7 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any damp locations. The 4 in canless recessed can downlight includes certifications to both Energy Star? and the California Appliance Efficiency Database under JA8 that can be used to comply with California Title 24 Part six high-efficacy LED light source requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
ETI SSL's 3 in LowPro recessed downlight with Color Preference? and nightlight is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture offers three unique features first, there is no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Second, you can choose between five color temperatures of light output for your space from warm to cool whites, bright white and daylight. Third, the nightlight produces a soft, amber hue when activated from your wall switch. The 3 in LowPro recessed downlight emits 561 Lumens of light while using only 9.06 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any wet locations. It is maintenance-free with no need to replace bulbs and is IC Rated for direct contact with insulation.
|
No driver, quick and easy-to-install. White with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI Edge-Lit Downlight, 120 V, 8.5 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 450 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 3 in, Dimmable , -13 to 104 deg F
|
A complete ultra-thin direct mount down light that chooses the color temperature directly on the fixture. Choose between 5 color temperatures ranging from warm (2700 K) to daylight (5000 K) prior to installing in ceiling. For use in new construction, remodel and retrofit installation, without needing a housing or j-box. LED driver offers 120 volt dimming capability. The HLB4 lens provides uniform illumination in wet location listing. HALO matte white finish with textured lens to provide smooth light distribution. Fixture is built to last with maintenance-free energy efficient LEDs with 50,000 hours of light. IC rated, for direct contact with insulation. Airtight, wet rated, can be used in shower and outdoor light applications. 1/2" depth for use in shallow ceilings. Fits into applications with as little as 3.5" plenum clearance.
|
Halo BLD4 Downlight, 120 V, 0.087 A, Wattage Rating: 10 W, Trim Type: Surface Mount, Lamp Base: E26 Edison Screw, Lamp Type: LED, Surface Mounting, Ceiling Type: Recessed, Average Life: 50000 hr, Lumens: 800 Lumens, Color Temperature: 2700, 3000, 3500, 4000, 5000 K, Color Rendering Index (CRI): 90, Aluminum, Bright White/Daylight/Neutral White/Soft White/Warm White, Dimensions: 6-3/16 in Dia x 7/8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI SSL's 6 in canless recessed can downlight with integral J-box is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture has no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Equipped with our Color Preference? Technology to choose between five color temperatures of light at install. The 6 in canless recessed can downlight emits 960 Lumens of light while using only 14.3 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any damp locations. The 6 in canless recessed can downlight includes certifications to both Energy Star? and the California Appliance Efficiency Database under JA8 that can be used to comply with California Title 24 Part six high-efficacy LED light source requirements.
|
The ETi 30-in-1 color preference retrofit downlights offer the flexibility and performance to meet the requirements of any job. With 5 CCT selectable, 3 Lumen brightness settings, plus 2 trim/baffle color 30 different configurations. The 30-in-1 downlight reduces inventory investment since 1 SKU can replace multiple SKUS as well as offering the customer the ability to fine tune color and brightness for each installation location.
|
ETI SSL's 4 in LowPro recessed downlight with Color Preference? and nightlight is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture offers three unique features first, there is no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Second, you can choose between five color temperatures of light output for your space from warm to cool whites, bright white and daylight. Third, the nightlight produces a soft, amber hue when activated from your wall switch. The 4 in LowPro recessed downlight emits 649 Lumens of light while using only 9.6 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any wet locations. It is maintenance-free with no need to replace bulbs and is IC Rated for direct contact with insulation.
|
|
|
