Home > ELECTRICAL > LIGHTING & CEILING FANS > FLOURESCENT & LED LIGHTING
Choose a sub category:
FLUORECENT FIXTURES - STRIP FLUORESCENT FIXTURES-DECOR FLUORESCENT FIXTURE PARTS/PAN
FLUORESCENT BALLASTS FLUORESCENT STARTERS LED FIXTURES - STRIP
LED FIXTURES - DECOR LED FIXTURES - TROFFER LED FIXTURES - HIGH BAY
LED SHOP LIGHTS LED SHOP LIGHTS -SMART / BLUET
Sort By:
Page of 3
FLUOR STARTER 15/20W STARTER FLUO 36IN/48IN 30W/40W LAMPHOLDER FLUOR SLM PLUNG WHT
Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less. Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less. White slimline lamp holders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL listed. Temperature rating of -40 to 65 deg C.
Advance AmbiStar RELB2S40N35I Dimming Electronic Lamp Ballast LENS FLUOR REPL 24X48IN GRY Advance Centium ICN-2S40-N35M Electronic Lamp Ballast
Ambistar electronic ballasts are an easy to install, energy efficient replacement solution for optimizing residential and hospitality lighting. Canarm Replacement Lens, 48 in L, 6-1/2 in W, 2-3/8 in H, Acrylic, White, Suitable for: EFW848232 Fluorescent Wrap Lights Advance Centium Lamp Ballast, Electronic, Series: ICN-2S40-N35M, 120/277 V, 72 W, 0.62 - 0.26 A, 50/60 Hz, Fluorescent Lamp, T12 Lamp Base, 40 W Lamp, 2 Lamps, 0.85, Rapid Start, >0.9, 10 - 50 deg F Minimum, NEMA 410 Enclosure, 25 deg F, 1 in Overall Height, 1.3 in Overall Width, 9-1/2 in Overall Length, Aluminum, White Painted, Maximum THD <10%
MTL BRKT FOR 8FT STRP LT RTOFT SHOPLIGHT 3FT AP 30L 4K 120V LGTNG ACRY REPL 7X2-1/2X47IN
Metal bracket used to retrofit 8 ft Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures. The Metalux AP Shop Light is an extruded aluminum integrated LED fixture that comes with a 120 V grounded cord and plug. The APSHP replaces two/three-lamps fluorescent shop light or strips and is well suited for work benches, counters, work shops, studios and storage areas where general task lighting is needed. The APSHP includes mounting hardware and On/Off pull chain for easy installation and operation. The APSHP is UL listed with LEDs rated to 50,000 hr life and backed by a 3 years warranty. Liteline Wraparound Lens, 47 in L, 6-1/2 in W, 2-1/2 in H, Acrylic, Clear, Suitable for: K12A-114-248 Surface-Mount Fixture
Advance Centium ICN-4P32-N Electronic Lamp Ballast BALLAST ELEC T8 48IN 1-2 LAMP LIGHT SHOP LED 3200LUMEN
Philips Advance Fluorescent Ballast, 120 to 277 VAC, 0.94 A, Operating Frequency: 50/60 Hz, Wattage Rating: 111 W, Circuit Type: Parallel, Lamp Wattage: 32 W, Number of Lamps: 4, Start Type: Instant, Ballast Factor: 0.89, Total Harmonic Distortion (THD): <10%, Thermal Protection: Class P, Operating Temperature: -18 deg C, Dimensions: 9-1/2 in L x 1-5/16 in W x 1 in H Sylvania Fluorescent Ballast, 120/277 V, Number of Lamps: 2, Start Type: Instant, Total Harmonic Distortion (THD): <10 %, Dimensions: 9-1/2 in L x 1.68 in W x 1.18 in H This 4 ft 3200 lumens LED Shop Light is perfect to use in a workshop, over a workbench, or in a garage. Each light includes (2) 12 in hanging chains, 6.5 in on/off pull chain, and a 6 ft AC power cord. It is rated for indoor use.
Advance Centium ICN-2P32-N Electronic Lamp Ballast UTIL WRAP LED 17L 4K 120V 2FT HLDR LMP FLUOR 660W 600V WHT
Philips Advance Centium Fluorescent Ballast, 120 to 277 VAC, 0.49 to 0.22 A, Operating Frequency: 50 to 60 Hz, Wattage Rating: 56 W, Circuit Type: Parallel, Lamp Wattage: 32 W, Number of Lamps: 2, Start Type: Instant, Ballast Factor: 0.89, Total Harmonic Distortion (THD): >10 %, Thermal Protection: Class P, Dimensions: 9-1/2 in L x 1-5/16 in W x 1 in H Metalux WP Utility Wrap Light, 120 V, 0.13 A, Wattage Rating: 15 W, Lamp Wattage: 15 W, Number of Lamps: 2, Lamp Type: LED, Average Life: 50,000 hr, Color Rendering Index (CRI): 80, Color Temperature: 4000 K, Lumens: 1811 Lumens, Ballast/Driver Type: Non-Dimmable, Shade Type: Classic Wrap-Around Rectangular, Shade Material: Acrylic Prismatic, Temperature Rating: 0 to 104 deg F, Fixture Material: Steel, Fixture Finish: Post Painted, Fixture Color: White, Dimensions: 24 in L x 5 in W x 2-1/2 in H, Ceiling, Surface, Wall Mounting Commercial-grade white fluorescent lamp holder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 W, 600 V.
HLDR LMP FLUOR 660W 600V WHT FLUO MEDBIPN LAMPHLDR STRIPLIGHT 1L LED 1050L 4K 2FT
Commercial-grade white fluorescent lamp holder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 W, 600 V. Commercial-grade white fluorescent lamp holder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 W, 600 V. Metalux Linear Single Lens Striplight, 120 to 277 V, 0.04/0.08 A, Wattage Rating: 9.8 W, Number of Lamps: 1, Lamp Type: LED, Average Life: 50,000 hr, Color Rendering Index (CRI): 80, Color Temperature: 4000 K, Lumens: 1165 Lumens, Light Color: Cool White, Fixture Material: Steel, Fixture Color: White, Fixture Finish: Powder-Coated, Dimensions: 2 ft L, Includes: Aligner Bracket
SHOPLT LED 4300L 4K 120V 4FT LIGHT STRIP 2FT LINK LED 10W LIGHT SHOP LED 5000L 48IN N/L
The Metalux AP shop light is an extruded aluminum integrated LED fixture that comes with a 120 V grounded cord and plug. The APSHP replaces two or three lamp fluorescent shop lights or strips and is well suited for work benches, counters, work-shops, studios and storage areas where general task lighting is needed. The APSHP includes mounting hardware and on/off pull chain for easy installation and operation. The APSHP is UL-listed with LEDs rated to 50,000 hrs and backed by a 3 years warranty. ETI LED Strip Lights offer exceptional performance as high quality replacements for traditional fluorescent light fixtures. Lasting more than 5 times longer than fluorescent alternatives, these strip lights reduce energy and maintenance costs. Perhaps the best aspect of these LED strip lights is their versatility. With a variety of available options, ETI LED strip lights are perfect for both residential and industrial uses. Typically used in work shops, garages and utility rooms, common commercial applications include manufacturing facilities, offices, retail stores, restaurants, schools, hospitals and hotel/motel locations. Whether individual or linked together, standard or high lumen output, plug-in or direct wire, 120 V or multi-volt, surface-mounted or suspended, these slim, low profile fixtures provide the right amount of light where it is needed. This 4 ft linkable 5,000 lumens LED metal shop light is perfect to use in a workshop, over a workbench, or in a garage. Each light includes (2) 12 in hanging chains with S hooks, 7.5 in on/off pull chain and a 5 ft AC power cord. It is rated for indoor use.
STRIP LGT 2LT LED 2100L 4K 2FT UTIL WRAP LED 32L 4K 120V 4FT STRIP LIGHT T8 2LIGHT 4FT
The Metalux ST commercial series is a full width and DLC listed LED strip light. It is designed to retrofit and replace fluorescent strip lights or for new construction. The ST comes standard with continuous row mount aligner bracket, toolless channel cover, 3500 K, 4000 K or 5000 K CCT; universal voltage cold start driver and 5-years warranty. These construction features make the ST a combination of quality, performance and value that helps make ordering, installing and saving energy the top focus of any stock or project business. The Metalux WP utility LED wrap light is a DLC compliant fixture designed to retrofit and replace fluorescent wraparounds. The WP has a compact, low-profile design, prismatic lens and post painted steel exterior. Standard features include prismatic acrylic lens, surface or suspended mount features, universal voltage cold start driver and 5 years warranty. These features make the WP a combination of quality and value that can be used in most commercial, educational, residential, corridor, stairway, multi-use or utility applications. The SSF Series is a functional and multi-purpose standard strip family that incorporates premium performance and construction durability. Designed with our easy-to-use Flip-Up socket design, the SSF significantly reduces installation time. The performance and application versatility of this series can be increased by incorporating symmetrical or asymmetrical reflectors. The SSF Series can be installed using various mounting methods and numerous options and accessories are available. The SSF Series can be the illumination solution in commercial, industrial, retail and residential applications. Fixtures can be used in storage/utility areas, coves, display cases, shops, task and general area lighting. Certain airborne contaminants can diminish the integrity of acrylic components.
CEIL FIXTURE FLO WHT RESIDENT LIGHT STRIP 4FT LINK LED 20W ACCS FPANEL SRFC MT KT 1X4FT
Wrap light fixture, 2 light, 32 W. Acrylic prismatic lens, will not yellow. Thermally protected electronic ballast. Uses 2 F32 T8w lamps (not included). For dry and damp locations, cold temperatures. 48 in x 5-1/8 in x 2-3/8 in. cCSAus, GreenChioce. ETI LED Strip Lights offer exceptional performance as high quality replacements for traditional fluorescent light fixtures. Lasting more than 5 times longer than fluorescent alternatives, these strip lights reduce energy and maintenance costs. Perhaps the best aspect of these LED strip lights is their versatility. With a variety of available options, ETI LED strip lights are perfect for both residential and industrial uses. Typically used in work shops, garages and utility rooms, common commercial applications include manufacturing facilities, offices, retail stores, restaurants, schools, hospitals and hotel/motel locations. Whether individual or linked together, standard or high lumen output, plug-in or direct wire, 120 V or multi-volt, surface-mounted or suspended, these slim, low profile fixtures provide the right amount of light where it is needed. Metalux Surface-Mount Kit, Specifications: LED Lamp, 80 CRI, 7000 Lumens, Dimensions: 47-7/8 in L x 11-7/8 in W, Suitable for: 1 x 4 ft Flat Panel LED, Includes: Wire and Wire Nuts
STRIP LIGHT LED 2100L 4K 4FT LIGHT SHOP LED WHITE 128W 4FT LIGHT PANEL LED BRT WHT 2X2FT
Metalux ST Strip Light, 277 V, 0.16/0.07 A, Lamp Wattage: 19.4 W, Number of Lamps: 1, Lamp Type: LED, Average Life: 50,000 hr, Color Rendering Index (CRI): 80, Color Temperature: 4000 K, Lumens: 2153 Lumens, Temperature Rating: 0 to 104 deg F, Steel, White, Powder-Coated, Dimensions: 48.375 in L x 2.063 in W x 2.5 in H, Chain/Surface/Toggle Mounting, Includes: Row Mount Aligner