|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extends an adjustable Pylex screw to 24 more inches, to push it further into the ground. Its steel structure gives it the same resistance and durability as the Pylex foundation screws. A good solution in case of major freezing or insertion near foundations. Easy installation: Just insert the extension between the head and the rod of the adjustable screw. Baked powder coating finish provides excellent rust resistance. Is compatible with Pylex 32 in or adjustable Pylex screws 50 in. Offers long term protection since the wooden post is above ground level.
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
Easy-to-install and made for both indoor and outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pylex Ground Ecospike, Square, Black, Suitable for: 4 x 4 in Square Post
|
Easy-to-install and made for both indoor and outdoor use.
|
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nuvo Iron Post to Beam Support, Steel, Galvanized/Powder-Coated, Black, 6 in H, Includes: Hardware
|
Nuvo Iron Post to Beam Support, Steel, Galvanized/Powder-Coated, Black, 6 in H, Includes: Hardware
|
This spike, designed to support a patio, shed or deck, is easier to install and more economical than a concrete bearing block. Its adjustable head facilitates the leveling of the floor during construction. Ideal for rough or steep terrain. Its stabilizing anchor-hooks make it return to its initial position after ground movements (freezing, thawing). Its steel structure provides high durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete. No more endless and complicated tasks! Quick installation, with a lever, just screw the Pylex screw into the ground. Its steel structure, with a baked powder coating finish and its spiral disk ensure stability. This modern technology can be used in all types of terrain and resists ground movements (freezing, thawing).
|
The simplest and most efficient way to support a patio, tool shed or deck without needing to dig or pour concrete. Quick installation with a lever. Adjust the head to facilitate installation or add an extension to insert it deeper.
|
Commercial steel post designed to support heavy-duty work, fences (<84 in), post boxes, signs. A solution which is fast, efficient and economical, which does not require digging or pouring concrete. Easy to install, drive in the ground using a drive block and attach a square post to it. Its blades anchor it solidly. It does not require maintenance due to its baked powder coating finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The simplest and most efficient way to support a fence (<60 in), sign, letter box without needing to dig or pour concrete. No more endless tasks! Quick installation, with a lever, just screw the Pylex-L in the ground. Its steel structure, blades and spiral disk ensure stability. This modern technology can be used in all types of terrain and resists ground movements (freezing, thawing).
|
Commercial steel post designed to support heavy-duty work, fences (<84 in), post boxes, signs. A solution which is fast, efficient and economical, which does not require digging or pouring concrete. Easy to install, drive in the ground using a drive block and attach a square post to it. Its blades anchor it solidly. It does not require maintenance due to its baked powder coating finish.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength along with these design improvements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The simplest and most efficient way to support a commercial shelter (or other type of installation) without needing to dig or pour concrete. No more tedious tasks! Easy installation, dig a 2 ft hole using the screw, then screw it in the ground. Its pulling-off force and side thrust, its metal structure and its 4 blades ensure solidity and durability. This modern technology can be used in all types of terrain and resists ground movements (freezing, thawing). Supports loads up to 5000 lb, 4781 lb of pull-off force and 1641 lb of side thrust. Baked powder coating finish provides excellent rust resistance. To be used with 6 in x 6 in square posts. Offers a simple leveling option and long term protection since the wooden post is above ground level.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts.
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BCS is designed to connect a multi-ply member beam to a post. The dimensions of this post cap accommodate the narrower width of multiple 2X members on top of the post. The BCS provides both lateral and uplift support and features double-shear nailing that distributes the load through two points for optimal strength.
|
The BCS allows for the connection of two 2X's to a 4X post or three 2X's to a 6X post. Double-shear nailing between beam and post gives added strength. The BC Series offers dual-purpose post cap/base for light cap or base connections.
|
The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BCS is designed to connect a multi-ply member beam to a post. The dimensions of this post cap accommodate the narrower width of multiple 2X members on top of the post. The BCS provides both lateral and uplift support and features double-shear nailing that distributes the load through two points for optimal strength.
|
The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks.
|
The LPCZ is designed for a variety of connections between a 4X or 6X beam and a post. This versatile, light post cap has an adjustable design that allows for connection versatility in both new and retrofit applications where structural support is needed. The LPCZ has a ZMAX? coating, a thicker galvanized finish that helps to extend the service life of the connector.
|
|
|
