Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > FRAMING ANGLES/ANCHORS
Sort By:
Page of 2
HURRICANE TIE STEEL 6X1-3/8IN L-ANGLE ADJUSTABLE 5IN 18GA TIE STRINGER ADJUSTABLE 18GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 6 in L, 1-3/8 in W, 18 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
ANGLE L-MED ZMAX 2X2X4IN 18GA TIE HURR 20GA 35/8IN GALV HNGR JOIST 8X8IN 12GA GALV
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 3-5/8 in L, 20 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood Our line of angles provides a way to make a wide range of 90 deg connections.
TIE HURRICANE GLV STL 18GA 6IN ANG FRMG 3IX3IN 12GA GALV ANG FRMG 4IX4IN 12GA GALV
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Our line of angles provides a way to make a wide range of 90 deg connections. Our line of angles provides a way to make a wide range of 90 deg connections.
ANCH FRMG 6 WAY 18GA GALV TIE DCK JOIST Z MAX 4X4IN ANGLE L-MED ZMAX 2X2X6IN 18GA
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation. The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
FRMG ANG 1-1/2IN 18GA ANGLE STAIRCASE ZMAX L-ANGLE ADJ 6-3/8IN 18GA
Simpson Strong-Tie A Angle, Steel, Galvanized, 1-1/2 in W, 2 in D, 1-3/8 in H, Fastener Type: Nails, Material Thickness: 18 ga Simpson Strong-Tie Staircase Angle, Steel, 1-1/2 in W, 8-1/2 in H, 12 ga The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
ANG SUPP GALV 6X6IN 12GA ANCH FRMG 2X3IN 18GA GALV ANCH FRMG 2-1/2IN 18GA Z MAX
Our line of angles provides a way to make a wide range of 90 deg connections. The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation. The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
TIE RAFTER GALV 18GA ANCH FRMG 6 WAY 18GA Z MAX SUPPORT STAIR ANG ZMAX 10.25IN
Simpson Strong-Tie Hurricane ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation. Simpson Strong-Tie Staircase Angle, Steel, 2 in W, 2 in D, 10 in H
TIE HURRICANE RAFTER TO WALL TIE DCK JOIST Z MAX 2X4IN TIE HURRI/SEISMC 18GA 5-1/4IN
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. The DPTZ deck post tie products are used to attach 2 x 4 (DPT5Z) or 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Simpson Strong-Tie hurricane ties provide a positive connection between the truss as well as rafter and the wall of the structure to resist wind and seismic forces.
TIE HURRICANE/SEISMIC ANCHOR ANG FRMG ZMAX 2X1-1/2IN 18GA ANG REINFORCING 7IN 16GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 10-7/16 in L, 1-1/2 in W, Fastening Method: Nail, Resists: Corrosion Our line of angles provides a way to make a wide range of 90 deg connections. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
ANGLE REINFORCING ZMAX 9INCH ANGLE FRAMING 2X1-1/2X2-3/4IN ANG REINFORCING 5IN 16GA
The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. Our line of angles provides a way to make a wide range of 90 deg connections. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.