|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative dual material handle for comfort and performance; includes reverse and offset scrapers, oil and solvent resistant.
|
The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free hook. The blade of the removal tool is angled from the bottom plane of the handle and allows the user to keep their wrist straight while keeping knuckles well above the work. The surface finishing and plating of the blade assures that the sharply angled hook will not cut into the vinyl material or produce shavings. Additional comfort and control is achieved with a non-slip textured handle grip. The gripping surface will not become slick from moisture and the form fitting, plastisol dip process bonds the grip for the life of the tool.
|
Forms tabs to secure vinyl siding or plastic skirting to finishing trim. 3/8 in throat and vinyl handle grips for added comfort.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.
|
Add snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel. Used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. Throat depth of 3/8 in and length of 9 in.
|
The Crescent Wiss HVAC crimper helps professionals who work in the trades crimp male fitting ends to connect guttering, downspouts or metal pipes. Connect square or round sheet metal piping of the same size by crimping one end, using the efficient 3-blade design and labor-saving compound action jaw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4 in long double crimps without causing deformation of downspout walls. A factory-like crimp ensures that the downspout walls stay square for a tight fitting, leak-proof connection. A handle closing stop helps to maintain a consistent crimp profile. Made with hardened all-steel construction and a nickel chrome finish, you can assure this tool will last a long time. Added power and comfort is also achieved with RedLine Handle technology. The handle opening of the Gutter Crimper compliments the natural power stroke of any user's hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage. Every handle is made with non-slip grip inserts, comfortable Handle grip contours, spring handle actuation and a thumb-operated handle latch. All of these qualities ensure a natural fit and feel for comfortable one hand operation.
|
Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique Andy? combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous materials including layered components of heavy-grade vinyl siding, aluminum trim coil, landscape edging, vinyl flooring, carpeting and leather. Replacement blades are available and are easily installed in the field.
|
Sleek styling, easy blade replacement and larger handles make the Andy? Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper or sheet metal. Snips are capable of cutting tight material shapes such as a J-Channel. A full 3 in cutting length makes straight shearing with the Malco Andy? Snip fast and easy. Blade replacement is easily accomplished in the field.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique one-hand operation latch. soft-touch, non-slip handle insert. Ergonomically contoured handles. Opening maximizes handle leverage. Throat depth adjustments from 1/4 in to 5/8 in.
|
For punching holes in vinyl and aluminum siding. Punches horizontal slot for adding or elongating nail holes in siding to accommodate irregular stud spacing. Slot measures 5/32 in x 3/4 in. Throat depth of 5/8 in with 8-1/2in L. Ergonomic Redline handles with unique one-hand operation latch.
|
The snap lock punch for vinyl siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and guard against dislodging due to relaxation of vinyl from heat or blowout during times of high pressure and wind. Constructed of hardened steel stampings and rugged investment cast alloy steel jaws with rust-resistant nickel plate and black oxide finishes to ensure long service life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Malco J-Channel Cutter, 1-Piece, Maximum Cutting Width: 5/8 in, Steel Blade, Ergonomic Soft-Touch, Non-Slip Handle
|
The Crescent Wiss? Straight handle hand seamer is a powerful tool for bending or flattening sheet metal by hand. It utilizes an optimal handle span to deliver maximum power from an ergonomic operating range and features non-slip cushion grips for great comfort and control.
|
The Gecko Gauge SA903 gauges and supports cement-board siding for one-person installation with nearly no layout time. It is adjustable at 1/4 in increments for 4 to 8 in siding reveals. It won't scratch or mar pre-painted siding. The friction-cam mechanism supports full 12 ft cement-board siding lengths. It can be used with 5/16 in fiber-cement siding products, including James Hardie's updated HZ5 Series with new eased drip-edge profile.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The UniStand? adjustable was designed to provide a stand as strong as Van Mark's bending brakes are. We developed a stand that is both rigid, durable and adjustable to meet the user's need. The wheels now make it easy to transport your tool anywhere on the jobsite.
|
VanMark Cutting Accessory, Steel, Suitable for: Mark I, II and IV Series Brakes
|
Coil Dispenser? is one accessory that keeps paying for itself over and over. No unraveling coils and no wind damage are just two features that make this tool a must have for anyone in the trade. Coil Dispenser? sets up fast and allows materials to be fed directly into most brakes, saw tables and slitters. Coil Dispenser? works with QuickScore? and TrimCutter? for fast processing of materials down to desired lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our most versatile utility brake, the Trim-A-Brake II?, was designed for our contractors who are constantly on the go. This lightweight brake loads into the truck quickly for use among multiple crews and requires little setup or maintenance. For making basic shapes, this is the ideal brake for use in the shop or on the job.
|
Building upon the reputation of the Mark I Series?, the Mark II TrimMaster? arrives with leading technologies such as the POWER slot? hinge, easier bending, making smaller J channels and hollow core hinge extrusions for added strength. We've also left you the ability to make fine-tune adjustments to this brake, though you may never have to. Ultra high molecular weight polymer wedges are independently adjustable and replaceable should the occasion ever arise.
|
|
|
