Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
Page of 4
BRACKET FLASHING SNAP ON ZINC Stanley 193839 Round Rail Track End Cap PULL UTILITY DOOR MTL ZN 1/PK
Onward Support Clip, Dimensions: 6 in L x 2 in W x 2 in H, Steel, Zinc With bolt, nut and washer. Pack loose. A sturdy and reliable choice for general construction. Ideal for use on sheds, barns or gates. Quick and easy installation.
BRACKET SINGLE WALL MOUNT ZINC National Hardware V6 Extra Heavy Door Pull HOLDER BAR CLST ZINC MTL 1/PK
Designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place. National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel, Zinc, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws With its minimalist appearance and sleek design, this open bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation.
Stanley 351503 Open Bar Holder Stanley 235309 Open Bar Holder HLDR BAR CLSD ZN MTL
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. With its minimalist appearance and sleek design, this closed bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation.
BRACKET SINGLE WALL GALVANIZED Stanley 235291 Closed Bar Holder Stanley 351502 Closed Bar Holder
This product is designed so that tightening the lag screw secures the bracket around the track and holds it firmly in place. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
BOXRAIL JOINNER ZINC          National Hardware V6 Extra Heavy Door Pull BRACKET SGL RAIL GLV STL
Onward Box Rail Joint Connector, Single, Specifications: 450 lb, Steel, Zinc, Dimensions: 2-1/4 in L x 1-3/4 in W x 3-1/4 in H, Suitable for: 1-1/2 to 3-1/2 in Thick Doors National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Black, Steel, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws Designed to join two rails, end to end and holds it in place with the screw included. Wall mounting is designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place.
STAY ROLLER ZPLT STEEL        BRACKET SGL RAIL RND          Stanley 100834 Door Bumper
Onward Stay Roller, Roller Diameter: 2 in, Plastic/Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in L x 1-7/8 in W x 3-1/2 in H, Suitable for: 1-1/2 to 2-1/2 in Thick Doors, Includes: Flat Head Wood Screw This product is designed so that tightening the lag screw secures the bracket tightly around the track and holds the bracket firmly in place. Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
BRACKET RAIL SNGL ZPLT STEEL  LATCH JAMB SLIDING DOOR ZINC  BRACKET/BOXRAIL OVRHD MNT ZINC
Onward Box Rail Bracket, Single, Steel, Zinc, Dimensions: 4-1/2 in L x 1-3/4 in W x 3 in H The cam action combined with the adjustable hook firmly holds the door against the jamb. Onward Low Box Rail Bracket, Single, Galvanized Steel, Dimensions: 4-7/8 in L x 1-3/4 in W x 3-1/2 in H, Includes: Screws
HANGER BOXRAIL W/BSHG RLLRS ZN Stanley 51L2 Double Triangle Bracket Stanley 104331 Single Side Bracket
Onward Dual Axis Box Rail Hanger, 450 lb Weight, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Bushing Rollers, Fixed Short Threaded Mounting Pin Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load. Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
National Hardware V6 Extra Heavy Door Pull ROLLER STAY SLIDING DOOR ZINC GUIDE SINGLE DOOR ZINC
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, White, Steel, Vinyl-Coated, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws Onward Adjustable Stay Roller, Number of Rollers: 1, Zinc, Dimensions: 5-1/2 in L x 3-15/16 in W x 4 in H, Suitable for: 1-1/2 to 3-1/2 in THK Aluminum, Metal Frame, Wood Sliding Doors Onward Single Door Guide, Steel, Zinc, Includes: Screws
BRACKET/BOXRAIL SGL WALL MTD  HANGER/BB BOXRAIL WHEEL ZINC  STAY ROLLER LDTY STL ZN
Adjustable wall mount bracket for box track rails. Ideal for use on metal-sided or corrugated siding. Onward Double Axle Box Rail Hanger, 450 lb Weight, Bearing Type: Ball, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Ball Bearings, Short Threaded Fixed Mounting Pin Onward Stay Roller, Plastic/Steel, Zinc, Screw Mounting, Dimensions: 5-7/8 in L x 3-1/2 in W x 3-7/8 in H, Suitable for: 2 to 3-1/2 in Thick Doors, Includes: Screws