|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1/8 in W x 4-1/4 in H handles, 3-5/8 in CTC.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
This handle and latch is a non-handed inside surface mounted handle set only. It is made of chromed die-cast metal with 2-3/8 in mounting holes. The latch and lever rotate to engage the supplied surface mounted keeper. Used by many patio door manufacturers. Excellent as a primary as or a secondary screen door security latch.
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast.
|
The 800 series patio door handle set by Ideal Security adds elegance to your patio door. It's soft round lines and smooth handle portion make opening the door more comfortable. The plastic locking button and screw covers provide a unique appearance. This is for a surface-mount installation. The SK800 is installed on the face of the door, no cut out required. The distance between the screw holes is 6-9/16 in. The SK800K includes the inside handle with concealed screw caps, the outside handle with key lock, the strike and all fasteners. This handle will replace other surface-mount installed handles that use the same screw hole distances. The key lock is for convenience and is not high security. The handle is constructed from die-cast zinc and powder-coat painted for years of reliable usage.
|
Standard reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knockout plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16 in Dia if base of handle does not seat flush against surface of door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low-profile, long base die-cast handle set for mortise locks; hook style latch, non-handed.
|
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.
|
|
|
