|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ben-Mor Oval Sleeve, Aluminum, Dimensions: 5/32 in
|
Replacement garage door lift handle. The spacing between the holes is 5.7 in. There are several different standard spacing on the market, measure yours before ordering. Easy installation, includes carriage bolts and nuts. Made of galvanized steel.
|
Onward Garage Pulley, 3 in Dia, Includes: (5) Garage Pulleys
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IDEAL SECURITY Garage Door Roller, Nylon, Dimensions: 4-1/2 in L x 1-3/4 in Dia, Suitable for: Standard 2 in Tracks On Most Residential Doors
|
This is a universal replacement top bracket (also called a fixture) for garage doors. It is for use on overhead sectional garage doors and replaces a variety of different shapes and sizes of brackets. This bracket or fixture is for use only on the upper section of the top garage door panel, where it doesn't connect to another panel. It holds a standard residential size garage door roller. It is fully adjustable, includes all nuts and bolts and complete installation instructions are found on the back of the package. You can also find written and video instructions on our website.
|
Onward Hinge, 100 lb Weight, Door Leaf Height: 2-3/4 in, Door Leaf Thickness: 0.07 in, Frame Leaf Height: 2-3/4 in, Frame Leaf Thickness: 0.07 in, Dimensions: 7-7/16 in L x 2-3/4 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Hinge, 100 lb Weight, Door Leaf Height: 2-3/4 in, Door Leaf Thickness: 0.07 in, Frame Leaf Height: 2-3/4 in, Frame Leaf Thickness: 0.07 in, Dimensions: 7-9/16 in L x 2-3/4 in W
|
Onward Hinge, 100 lb Weight, Door Leaf Height: 2-3/4 in, Door Leaf Thickness: 0.07 in, Frame Leaf Height: 2-3/4 in, Frame Leaf Thickness: 0.07 in, Dimensions: 7-9/16 in L x 2-3/4 in W
|
Onward Door Pull, 1-5/8 in W, 7-5/16 in H, Includes: 1/4 x 1-7/8 in Carriage Bolt with (4) 1/4 in Nut
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IDEAL SECURITY Garage Door Hinge, Steel, Galvanized, Aluminum, Dimensions: 7-1/2 in L, Includes: 1/4 in Lag Screw, Bolts, Fasteners
|
IDEAL SECURITY Garage Door Hinge, Steel, Galvanized, Aluminum, Dimensions: 7-1/2 in L, Includes: 1/4 in Lag Screw, Bolts, Fasteners
|
IDEAL SECURITY Garage Door Hinge, Steel, Galvanized, Aluminum, Dimensions: 7-1/2 in L, Includes: 1/4 in Lag Screw, Bolts, Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8 in OD.
|
These pulleys are made of galvanized steel and are designed for use on overhead sectional garage doors with extension springs. They can be used either as stationary pulleys on the door frame or as the pulleys attached to extension spring.
|
Replacement garage door rollers for home use. Ideal for replacing old, worn, noisy or broken rollers. Garage door rollers are easy to replace yourself.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.
|
These pulleys are made of galvanized steel and are designed for use on overhead sectional garage doors with extension springs. They can be used either as stationary pulleys on the door frame or as the pulleys attached to extension spring.
|
Replacement bottom right and left garage door brackets. Brackets are used for the installation of SK7112 garage door extension cables and rollers. Both left and right brackets are included in package along with carriage bolts and nuts for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IDEAL SECURITY Garage Door Latch Cable, Specifications: 1/16 in Dia Wire, Steel, Galvanized, Dimensions: 5 ft L, Includes: (2) S-Hooks
|
Short stem heavy-duty roller with steel inner race, 10 ball bearings. Includes 2 roller assemblies. Roller 1-7/8 in OD.
|
Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The sliding bolt, locking lever and release mechanism are all spring-loaded. These allow it to be operated from the outside, with the addition of an exterior handle for locking and/or a lock cylinder for unlocking. It also works with centered exterior handles which use cables to operate one or town interior side locks at either end of the door.
|
Heavy-duty galvanized steel, spring-loaded slide-bolt lock with latch bolt release lever for overhead garage doors. Used with GD-52147 outside lock and latch assembly.
|
A pair of 12 ft, 6 in long aircraft cables that are used for the up and down operation of sectional garage doors. The galvanized cables have one ended looped with the other end fusion cut. The necessary brackets and S-hooks are included and installation instructions are included. Always unplug an electric door opener, if installed. Wear safety glasses and secure the door to reduce the risk of injury.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IDEAL SECURITY Garage Door Roller, Nylon/Steel, Dimensions: 4-1/2 in L x 1-3/4 in Dia, Suitable for: Standard 2 in Tracks On Most Residential Doors, Includes: (10) Ball-Bearings
|
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8 in W x 1/8 in thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4 in-20 x 1-7/8 in pancake-head carriage bolts with nuts.
|
Standard T replacement garage door lock handle. Shaft measures 5/16 in Dia with a 1-1/2 in hole spacing center to center. Shaft is 4 in long. When used with SK7115, the SK278 locking cylinder is required to unlock door from the outside.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Locking L-Handle, Shaft Diameter: 5/16 in, Shaft Length: 3-3/4 in, L-Handle Handle, 5-3/4 in OAL, 4-5/16 in OAW, Chrome
|
Installing garage door safety cables can help reduce the risk of damage and serious injury should a garage door spring when it is under pressure. The garage door safety cable will prevent the spring from flying across the garage if it breaks. A spring will only break when it is under pressure and that is when it is most dangerous. Always unplug any electric door opener, secure the door in the open position and wear safety glasses. Change garage door springs in pairs and always install safety cables.
|
5/16 in square shaft, 3 in L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2 in hole centers. Includes locking handle and 2 chrome-plated solid brass keys.
|
|
|
